Creative Wood Floors
01256 406 702 
Hello guest
Your basket is empty

Treatex Colour Tone 11060d- Pebble 0.5Ltr Tin

£15.76
Quantity:
Features 
Low Odour 
Meets with VOC emissions regulations 
Easy to apply 
Quick drying 
Protected with same features of Treatex Hardwax Oil Clear when 2 coats are applied (see: Treatex Hardwax Oil Clear). 
Please note!  
Clear Hardwax Oil must always be used as the final coat when Natural Hardwax Oil or Colour Tones are applied* 
Coverage 
 
1L will cover approximately 20m² in one coat depending on the timber and method of application. 
2.5L will cover approximately 50m² in one coat depending on the timber and method of application 
Preparation 
 
Sand the surface to smooth bare wood using 80-120 grit sandpaper. Ensure that any previous finish has been fully removed. Remove dust, dirt and any other contaminates which may lead to uneven absorption of Colour Tones. Make sure the surface to be treated is thoroughly dry. Stir tins and ensure product is at room temperature before use. Enough Colour Tone should be purchased to complete the whole project and when more than one container is required it is advisable to mix them together before use. Various species of timbers will take colours differently, we strongly advise a small trial application prior to starting a project. 
Back to top