A high performance, water-based wood oil for all parquets, wood floors and stairs
Quick and easy maintenance and refinishing
Specifically formulated to retain the natural appearance of untreated wood
Counteracts the darkening (damp wood look) associated with standard clear oils
Brings out the natural beauty of all types of wood
Long lasting protection
Does not require buffing
Provides a natural effect finish
No. of coats 3
Coverage Up to 15m² per litre
Drying time 12 hrs
Blanchon Original Wood Environment protects wooden floors without substantially changing the natural, unfinished colour of the wood. It is suitable for all commonly used types of wood species.
Oak - Obtains a light oak finish
Bare Timber - Gives the effect of raw, "untreated" timber
Ultra Matt - Brings out the wood grain, whilst providing a warm and rich effect without a sheen
Rough Timber - Gives the effect of rough, freshly sawn timber, before it has been treated
Satin Matt - Provides a subtle sheen with a slight shimmer which emphasises the wood grain
Please Note: This product may produce a slightly milky or white film effect on darker exotic hardwoods such as Iroko. This is caused by the very small amount of white pigment that has been added to the oil to retain the natural, unfinished look of lighter woods such as Oak, Pine, Larch and Beech.
Floors to be treated should be free of any dust, traces of detergent, grease, wax, polish and linseed oil.
Original Wood Environment should only be applied on surfaces which have been sanded back to bare wood
Stripping and de-waxing are not recommended
Do not use detergents, bleaches, whiteners or wood floor cleaners
Remove all traces of sanding dust
Fill any holes, gaps, or splits in the wood with a suitable wood filler