Surface renovation of lacquered, oiled,pre-varnished, and pre-oiled wood flooring,laminate
and PVC floors
BLANCHON RENOVATION LACQUER provides long-term renovation for worn and tarnished lacquered,
oiled, pre-varnished and pre-oiled wood flooring and laminate and PVC floors(2)
, without sanding
down to bare or replacing the coating.
Its unique formula with its strong wetting power and the addition of a hardener guarantee perfect
adhesion and high resistance to traffic and chemical attack.
RENOVATION LACQUER is easy and quick to use: it is applied directly without a primer. Its easy
preparation and 1-coat application enable rapid return to use of the site.
Available in 2 finishes: Satin, matt. (2)
Surface wear & tear: frequent use, surface scratches, small scratches, tarnished look.
*Information on the level of indoor emissions of volatile substances, with a risk of poisoning by inhalation, rated on a
scale from A+ (very low emissions) to C (high emissions).
Dust-free drying: 30-45 minutes.
Before sanding/recoating: 3 hours under normal conditions.
Do not leave more than 48 hours between coats.
Light traffic: Approximately 24 hours under normal conditions.
Final hardness: 5 to 7 days. Take precautions for the first few days. Do not cover (protective tarpaulins), do not lay carpet on the
lacquered wood floor. Do not move heavy furniture. Remove dust with a vacuum cleaner or broom (do not use impregnated textiles).
Next: place suitable protection (felt) under the feet of tables and chairs. If necessary, a sturdy doormat placed at the entrance to
the room will retain dust and gravel. Do not allow water or other liquids to stagnate on your lacquered wood floor (take care with
12 m² per litre per coat.