Creative Wood Floors
01256 841353 
Hello guest
Your basket is empty

Treatex Hardwax Oil ULTRA - Choose Size and Finish

Treatex Hardwax Oil ULTRA Ultra Flat Matt 210, Clear Matt 220, Clear Satin 230 & Clear Gloss 240 comes in 1 Ltr, 2.5Ltr or 10 Ltr
Item No. 120 (Flatt Matt) 220 (Matt) 230 (Satin) 240 (Gloss) 
Sizes: 1 Litre, 2.5 Litres, 10 Litres (Gloss only comes in 1 and 2.5 Litres) 
Comes in Flat Matt, Matt, Satin or Gloss sheen levels 
Has a warming effect on lighter coloured timbers 
No sanding required between coats 
Withstands high temperatures 
Very durable 
Easy to maintain with Treatex Wax Polish 
Spot repairable 
Slip resistance test BS 7976-2PTV. Suitable for domestic, commercial and wet areas.  
Complies with regulation DIN 68861-1B: Resistance to spills of water, wine, beer, coffee, tea, fizzy drinks etc 
Safe for use on children’s toys: DIN EN 71-3 
Meets with VOC emissions regulations 
Recommended for those with dust allergies; dirt and dust can be removed easily 
Contains no biocides, preservatives or carcinogens 
Slip resistance further increased with the addition of Treatex R12 Anti-Slip additive 
Easy to apply - buffed, brushed or rolled on 
Quick drying - usually dry within 3-6 hours 
Low odour 
Water resistant 
Very durable - further strengthened with Treatex hardener 
Easy to clean with Treatex Floor Care or Treatex Spray on Floor and Surface Clean 
Suitable for: Internal use 
Recommended timbers: All (dense/oily timbers may require Treatex Thinner). Has a warming effect on some timbers. 
Applications: Floors, doors, stairs, worktops, woodturning, skirting, furniture, instruments etc. 
1L will cover approximately 20m² in one coat / 12m² in two coats depending on the timber and method of application. 
2.5L will cover approximately 50m² in one coat / 30m² in two coats depending on the timber and method of application. 
10L will cover approximately 200m² in one coat / 120m² in two coats depending in the timber and method of application. 
1L will cover approximately 3 doors in two coats depending on the timber and method of application. 
Compatible with 
Treatex Colour Tones / Hardener / Thinner / Natural Hardwax Oil / Wax Polish / Floor Care / Preparation Cleaner / R12 Anti-Slip additive. 
If Treatex Hardwax Oil is applied too thickly, drying time will be increased. To speed up drying time raise the room temperature and increase air flow by opening doors and windows, or using a fan.  
Treatex brushes and rollers are available. Alternatively, use a high qulaity micrfibre roller or good quality brush. Tightly wrap a plastic bag around wet rollers and brushes to stop them drying out between coats. Wet brushes and rollers can be cleaned using white spirit. If you are using hardener then wet rollers and brushes will dry even if they are wrapped in a plastic bag and it will not be possible to clean them. 
Back to top 
Our site uses cookies. For more information, see our cookie policy. ACCEPT COOKIES MANAGE SETTINGS