Treatex Colour Tones have been designed to give you a beautiful range of colours with which you can change how your floors, doors, stairs and worktops look and feel, without hiding the grain or the natural beauty of the wood. This allows you to match the colours in your home when every piece of wood is different, being that every tree is unique. Treatex Colour Tones penetrate deep into the wood and enhance its natural beauty, manufactured on a base of natural sustainable raw materials and then completed with natural pigments used to colour the oils.
0.5L will cover approximately 10m² in one coat depending on the timber and method of application.
1L will cover approximately 20m² in one coat depending on the timber and method of application.
2.5L will cover approximately 50m² in one coat depending on the timber and method of application.
Clear Hardwax Oil must always be used as the final coat when Natural Hardwax Oil or Colour Tones are applied*
*Natural can be used as a top coat with Spruce Colour Tone to achieve a pure bright white
One coat of Colour Tone should brushed or rolled on. A second coat of Colour Tone is usually unnecessary and will deepen the colour. To ensure an even colour, remove excess product from the surface with a lint free cloth. Allow to dry - maintaining warmth and ventilation will enable the surface to dry within 3-6 hours. If excess product is not removed from the surface, Colour Tones will not dry properly and may appear patchy. Once dry, seal with two coats of Treatex Hardwax Oil Ultra Clear which is available in Flat Matt, Matt, Satin or Gloss sheen levels. The top coats of Clear Hardwax Oil are applied to prevent the natural pigments in our Colour Tones from wearing.